| Sizes | W:345mm, D:98mm, H:30mm |
|---|
Office Equipment
Glide Cutter KM5651
KM-5651 Glide Cutter 30cm Cut Length
This is a very convenient desktop cutting tool to have. The KM-5651 glide cutter can cut up to 30cm across the paper size (slightly bigger than A4 size) and is very easy to operate.
It is light weight, portable, but can cut up to 3 sheets 80gsm paper each time. Though made of plastic, it has 6 rubber studs at the base to provide non-slip operations during the lifting and cutting process. The base plate has grid lines and angular guide lines for all situations where more precise alignment are required before cutting. It also has the right and left extreme guide for the paper edge.
The cutting process is simple – lift up the cutting rule across the cutter (make sure cutting block is at the end of the rule); slip the paper and align it; put down the cutting rule; slide the cutting block across the rule to cut the paper.
For paper use only, NOT recommended to cut plastic.
Technical Data:
- Material: Mostly plastic
- Overall Size: W:345mm x D:98mm x H:30mm
- Cutting capacity: Up to 3 sheets of 80gsm paper
- Cutting Length: Up to 300mm
- Comes with swivel rule/guide
- Each is blister packed
- Packing: 36pcs/box; 72pcs/ctn
$10.80
Based on 0 reviews
Be the first to review “Glide Cutter KM5651”
Related products
- Office Equipment
Sign Stand Double A3 Landscape – T103H
Flexi Sign Stand T103H Landscape Mode Frame
Our Pedestal Sign Stand, SSI/T103H, is an independent stand able to stand by itself. It is made mostly of metal and the base of the stand is round with a diameter of 33cm. It is heavy so that it can resist strong wind mostly. The height of the sign frame can be adjusted with a knob in the middle of the vertical stand, from 0.97m to 1.3m from the ground. The sign frame itself can swivel from left to right or vice versa, but the viewing angle of the frame is fixed.
The base of the sign stand and its vertical support pole are all spray painted a dark grey so that it can blend with most environment. The sign frame has a dimension of 49cm x 38.5cm (width by height). All 4 sides of the frame edges are flip frame type so that quick change can be made to the displayed paper inside. The frame viewable size is 42cm x 31.5cm and is covered by a thick transparent acrylic plastic sheet. The sign stand also comes with an additional spare plastic sheet. The sign frame is made mostly of aluminium with rounded corners. There are no sharp edges on the whole pedestal sign stand.
Technical Data:
- Material: Mostly metal and aluminium
- Sign Frame Size: 42cm x 31.5cm viewable
- Adjustable Height: 97cm to 130cm from ground level
- Packing: 1pc/ctn
SKU: CRO/HS909 - Office Equipment
Guillotine Cutter A4 – 8274
#8274 A4 Metal-Base Guillotine Paper Cutter
The Guillotine paper cutter or guillotine cutter in short uses a shearing action between 2 metal edges to cut through a stack of paper. Normally a sharp lever arm (cutting blade) with a proper holder, pivoting on the base, where one can lift up and then push down with ease to slice through the stack of paper. Paper is place on top of the flat surface of the sturdy metal base, aligned and then cut. Just below the cutting blade, attached to the metal base, is the other piece of metal that provide the shearing action of cutting the paper. There are no sharp edges.
On the metal base itself, usually rectangular, are alignment grid for precision positioning, commonly using a dual scale system of metric and imperial measurements, to assist with measuring and accurate cuts. In some cases, the stack of paper is held down by a so called Compressor bar before the actual cutting action. There is also a paper guide bar, usually magnetic, for use with more accurate placement of the paper. The heavy metal base is usually attached with rubber studs to provide non-slip operation.
Our 8274 A4 Guillotine Paper Cutter come with a metal base, attached with non-slip rubber stoppers, with clearly printed metric measurement 5-mm apart on both horizontal and vertical sides. This sturdy guillotine cutter is equipped with a magnetic paper guide bar which is movable and a fixed top bar. Both of these are designed for accuracy and aids in more precise positioning and cutting. The cutting length is from B7 size up to A4 size (97mm to 297mm). The cutting blade can be locked away when not in use for safety purpose. Also, all 3 sides of the metal base have chamfered edge to prevent any accidental cut from the metal. Metal base is spray-painted and coated with a thick coat of paint. Quality, precision and ease of use is the key to cut precisely what you want to cut.
This is one of the office equipments that is very commonly use in many offices and even schools.
Technical Data:
- Overall Size: W:280mm x D:480mm x H:50mm
- Metal Top Surface Size: W:254mm x L:300mm
- Clearly printed paper size indicator on top surface
- Calibrated 5mm-apart scale on both horizontal & vertical sides
- Paper Cutting: B7(91mm x 128mm) to A4(210mm x 297mm) sizes
- Cutting: Up to 6 sheets of 80g wood-free paper
- Magnetic movable paper guide; non-slip rubber stoppers at base-metal structure
- Blade can be locked to safety position when not in use
- Beveled edges on all 3 other sides
- Packing: 6pcs/ctn
SKU: CGU/8294A - Office Equipment
Guillotine Cutter A3 – 8292
#8292 A3 Metal-Base Guillotine Paper Cutter
The Guillotine paper cutter or guillotine cutter in short uses a shearing action between 2 metal edges to cut through a stack of paper. Normally a sharp lever arm (cutting blade) with a proper holder, pivoting on the base, where one can lift up and then push down with ease to slice through the stack of paper. Paper is place on top of the flat surface of the sturdy metal base, aligned and then cut. Just below the cutting blade, attached to the metal base, is the other piece of metal that provide the shearing action of cutting the paper. There are no sharp edges.
On the metal base itself, usually rectangular, are alignment grid for precision positioning, commonly using a dual scale system of metric and imperial measurements, to assist with measuring and accurate cuts. In some cases, the stack of paper is held down by a so called Compressor bar before the actual cutting action. There is also a paper guide bar, usually magnetic, for use with more accurate placement of the paper. The heavy metal base is usually attached with rubber studs to provide non-slip operation.
Our 8292 A3 Guillotine Paper Cutter come with a metal base, attached with non-slip rubber stoppers, with clearly printed metric measurement 1-cm apart on both horizontal and vertical sides. This sturdy guillotine cutter is equipped with a magnetic paper guide bar which is movable, a fixed top bar and an auto Compressor bar. All of these are designed for accuracy and aids in more precise positioning and cutting. The cutting length is from B7 size up to A3 size (97mm to 420mm). The cutting blade can be locked away when not in use for safety purpose. Also, all 3 sides of the metal base have chamfered edge to prevent any accidental cut from the metal. Metal base is spray-painted and coated with a thick coat of paint. Quality, precision and ease of use is the key to cut precisely what you want to cut.
This is one of the office equipments that is very commonly use in many offices and even schools.
Technical Data:
- Material: Mostly metal
- Overall Size: W:395mm x D:660mm x H:50mm
- Metal Top Surface Size: W:383mm x L:465mm
- Clearly printed paper size indicator on top surface
- Calibrated 1cm-apart scale on both horizontal & vertical sides
- Paper Cutting: B7(128mm x 91mm) to A3(297mm x 420mm) sizes
- Cutting: Up to 5-8 sheets of 80g wood-free paper
- Magnetic movable paper guide & auto-compressor bar
- Non-slip rubber stoppers attached to base-metal structure
- Blade can be locked to safety position when not in use
- Chamfered edge on all 3 other sides
- Packing: 5pcs/ctn
SKU: CGU/8274 - Office Equipment
Guillotine Cutter A3 – 8272
#8272 A3 Metal-Base Guillotine Paper Cutter
The Guillotine paper cutter, or simply guillotine cutter, employs a shearing action between two metal edges to cut through paper stacks. It features a sharp lever arm (cutting blade) mounted on a pivot, allowing one to lift and then press down easily to slice through the paper. The paper is placed on the flat surface of a sturdy metal base, aligned, and then cut. Directly below the cutting blade, attached to the base, is another metal piece that facilitates the shearing action. The edges are not sharp.
The metal base, typically rectangular, includes an alignment grid with dual metric and imperial measurements for precise positioning and accurate cuts. Sometimes, a compressor bar holds down the paper stack before cutting. Additionally, a magnetic paper guide bar aids in precise paper placement. The heavy base is fitted with rubber studs for stability.
Our 8272 A3 Guillotine Paper Cutter features a metal base with non-slip rubber stoppers and clear metric measurements spaced 5 mm apart and imperial measurement of quarter inch apart. It’s equipped with a movable magnetic paper guide bar, a fixed top bar, and an automatic compressor bar for precise cuts. The cutting length ranges from B7 to A3 size (91mm to 420mm). The cutting blade can be locked for safety when not in use. The metal base has chamfered edges to prevent accidental cuts and is finished with a thick coat of paint for durability. This guillotine cutter is designed for safety, quality, precision, and ease of use, ensuring exact cuts every time.
This is one of the office equipments that is very commonly use in many offices and even schools.
Technical Data:
- Material: Mostly metal
- Overall Size: W:412mm x D:670mm x H:60mm
- Metal Top Surface Size: W:383mm x L:470mm
- Clearly printed paper size indicator on top surface
- Calibrated 5mm-apart scale on both horizontal & vertical sides
- Paper Cutting: B7(128mm x 91mm) to A3(297mm x 420mm) sizes
- Cutting: Up to 5-8 sheets of 80g wood-free paper
- Magnetic movable paper guide & auto-compressor bar
- Non-slip rubber stoppers attached to base metal structure
- Blade can be locked to safety position when not in use
- Beveled edges on all 3 other sides
- Packing: 5pcs/ctn
SKU: CGU/8292
There are no reviews yet.