Biosystem Ink Roller CI-168

#8274  A4 Metal-Base Guillotine Paper Cutter

The Guillotine paper cutter or guillotine cutter in short uses a shearing action between 2 metal edges to cut through a stack of paper. Normally a sharp lever arm (cutting blade) with a proper holder, pivoting on the base, where one can lift up and then push down with ease to slice through the stack of paper. Paper is place on top of the flat surface of the sturdy metal base, aligned and then cut. Just below the cutting blade, attached to the metal base, is the other piece of metal that provide the shearing action of cutting the paper. There are no sharp edges.

On the metal base itself, usually rectangular, are alignment grid for precision positioning, commonly using a dual scale system of metric and imperial measurements, to assist with measuring and accurate cuts. In some cases, the stack of paper is held down by a so called Compressor bar before the actual cutting action. There is also a paper guide bar, usually magnetic, for use with more accurate placement of the paper. The heavy metal base is usually attached with rubber studs to provide non-slip operation.

Our 8274 A4 Guillotine Paper Cutter come with a metal base, attached with non-slip rubber stoppers, with clearly printed metric measurement 5-mm apart on both horizontal and vertical sides. This sturdy guillotine cutter is equipped with a magnetic paper guide bar which is movable and a fixed top bar. Both of these are designed for accuracy and aids in more precise positioning and cutting.  The cutting length is from B7 size up to A4 size (97mm to 297mm). The cutting blade can be locked away when not in use for safety purpose. Also, all 3 sides of the metal base have chamfered edge to prevent any accidental cut from the metal. Metal base is spray-painted and coated with a thick coat of paint. Quality, precision and ease of use is the key to cut precisely what you want to cut.

This is one of the office equipments that is very commonly use in many offices and even schools.

Technical Data:

• Overall Size: W:280mm  x D:480mm  x H:50mm
• Metal Top Surface Size: W:254mm  x L:300mm
• Clearly printed paper size indicator on top surface
• Calibrated 5mm-apart scale on both horizontal & vertical sides
• Paper Cutting: B7(91mm x 128mm) to A4(210mm x 297mm) sizes
• Cutting: Up to 6 sheets of 80g wood-free paper
• Magnetic movable paper guide; non-slip rubber stoppers at base-metal structure
• Blade can be locked to safety position when not in use
• Beveled edges on all 3 other sides
• Packing: 6pcs/ctn

HP-5016  A4 21-Ring Plastic Comb Binding Machine

In this modern age, we are using more and more papers in our life. If not properly organise, we will face a paper hazard, chaos in offices and homes. Be it reports, legal documents, meeting notes, research papers or business plans, technically this can be accomplished by anyone using a simple binding machine, together with plastic combs or steel wire-O type to bind them into volumes. Once done, they can be neatly put away or stored.

A Comb Binding Machine, often referred to simply as a comb binder, is a device used for securely binding documents by punching holes along the edge of the paper and then inserting a plastic comb binding spine (also known as a comb or plastic comb) through those holes. This binding method is popular for its simplicity, affordability, and ease of use. Comb binding machines as office equipments, are commonly used in offices, schools, print shops, and various businesses for creating professional-looking reports, manuals, presentations, and documents.

The HP-5016 Binding Machine is designed with a heavy and sturdy metal base with 4 rubber studs at four corners to provide non-slip and firm operations. It has a punching capacity of 12 sheets of 80gsm paper with a maximum binding capacity of 400 sheets using a plastic comb of 51mm diameter.

The machine is used to punch and bind A4 size or smaller size paper documents. The Adjustable Edge Guide or (Sliding Limit Block) on the left side, together with the printed guides on the metal surface top easily assist to position the paper alignment and provide for accurate hole punching each time and every time.

Hole punching is effortless with the large metal handle. On the left side of machine, near the back, a Depth Margin Slider (Margin Gauge) allows for the depth margin between the edge of paper and the hole to be punched to be adjusted to suit different diameter of the comb used. A built-in storage tray is used to collect waste paper.

Technical Data:

• Material: Mostly metal
• Overall Dimension: W:410mm  x D:280mm  x H:170mm
• Punching Capacity: Up to 12 shts of 80g A4 paper each time
• Binding Capacity: Up to 400 shts of 80g paper (50mm comb)
• Number of Holes: 21 x  (Rectangular hole: 3mm x 8mm)
• Sliding limit block for easy paper alignment
• Depth margin slider (2.5mm to 6.5mm)
• Removable handle bar & waste bin tray
• Nett Weight: 5.75kg;  Individually packed
• Also A5 size binding (15 holes); or B5 size binding (17 holes)
• Packing: 1pc/box;  4pcs/ctn

Warranty against Factory Defects: 6 months from date of purchase.

YD-CM610  A4 21-Ring Plastic Comb Binding Machine

In the age of digital and computerisation world and its future paperless world, we are actually using a lot more paper in offices and homes than before. One simple way is to bind them into volumes, be it reports, legal documents, meeting notes, research papers or business plans and store it away neatly. This can be accomplished by anyone using a simple binding machine, together with plastic combs or steel wire-O type.

A binding machine, also known as a bookbinding machine or binder, is a device used to create professional-looking bound documents by securely fastening and finishing the edges of multiple pages or sheets of paper. Binding machines are commonly used in offices, print shops, schools, and various businesses to create reports, manuals, presentations, books, and other printed materials. They come in different types, each offering a specific binding method to suit the user’s needs. This is one of the office equipments that is very commonly use in many offices and even schools.

The 8622 Binding Machine is elegantly designed with a heavy and sturdy metal base with rubber studs at the 4 corners of the base for firm non-slip operations. It has a punching capacity of 12 sheets of 80gsm paper with a maximum binding capacity of up to 450 sheets using a plastic comb of 51mm diameter. Another feature is a 2-hole punch featuring 5.5mm diameter hole and 8cm apart. This is at the back of the machine.

The machine is used to punch and bind A4 size or smaller size paper documents. The Adjustable Edge Guide together with the printed guides on the metal surface top easily assist to position the paper alignment and accurate hole punching of either the A4 or A5 size paper each time and every-time. Hole punching is effortless with the large metal handle with convenient plastic grip. A built-in storage tray is used to collect waste paper. Another table guide on the top left-hand surface showing the Comb Size and Binding Capacity relationship to assist in the selection of right comb size for the number of sheets of documents to be banded.

Technical Data:

• Overall Dimension: W:385mm  x D:275mm  x H:360mm
• Punching Capacity: Up to 12 sheets of 80g A4 paper each time
• Binding Capacity: Up to 450 sheets of 80g paper (51mm comb)
• Number of Holes: 21 x  (Rectangular hole: 3mm x 8mm)
• Additional 2-hole Punch: 5.5mm hole diameter and 80mm apart
• Sliding locating block for easy paper alignment
• Removable handle bar & waste bin tray
• Rubber studded base offering non-slip operation
• Nett Weight: 3.45kg;  Individually packed
• Also A5 size binding(15 holes); or B5 size binding(17 holes)
• Packing: 1pc/box;  4pcs/ctn

Warranty against Factory Defects: 6 months from date of purchase.