Products

KM-5651 Glide Cutter 30cm Cut Length

This is a very convenient desktop cutting tool to have. The KM-5651 glide cutter can cut up to 30cm across the paper size (slightly bigger than A4 size) and is very easy to operate.

It is light weight, portable, but can cut up to 3 sheets 80gsm paper each time. Though made of plastic, it has 6 rubber studs at the base to provide non-slip operations during the lifting and cutting process. The base plate has grid lines and angular guide lines for all situations where more precise alignment are required before cutting. It also has the right and left extreme guide for the paper edge.

The cutting process is simple – lift up the cutting rule across the cutter (make sure cutting block is at the end of the rule); slip the paper and align it; put down the cutting rule; slide the cutting block across the rule to cut the paper.

For paper use only, NOT recommended to cut plastic.

Technical Data:

• Material: Mostly plastic
• Overall Size: W:345mm  x D:98mm  x H:30mm
• Cutting capacity: Up to 3 sheets of 80gsm paper
• Cutting Length: Up to 300mm
• Comes with swivel rule/guide
• Each is blister packed
• Packing: 36pcs/box;  72pcs/ctn

#8292  A3 Metal-Base Guillotine Paper Cutter

The Guillotine paper cutter or guillotine cutter in short uses a shearing action between 2 metal edges to cut through a stack of paper. Normally a sharp lever arm (cutting blade) with a proper holder, pivoting on the base, where one can lift up and then push down with ease to slice through the stack of paper. Paper is place on top of the flat surface of the sturdy metal base, aligned and then cut. Just below the cutting blade, attached to the metal base, is the other piece of metal that provide the shearing action of cutting the paper. There are no sharp edges.

On the metal base itself, usually rectangular, are alignment grid for precision positioning, commonly using a dual scale system of metric and imperial measurements, to assist with measuring and accurate cuts. In some cases, the stack of paper is held down by a so called Compressor bar before the actual cutting action. There is also a paper guide bar, usually magnetic, for use with more accurate placement of the paper. The heavy metal base is usually attached with rubber studs to provide non-slip operation.

Our 8292 A3 Guillotine Paper Cutter come with a metal base, attached with non-slip rubber stoppers, with clearly printed metric measurement 1-cm apart on both horizontal and vertical sides. This sturdy guillotine cutter is equipped with a magnetic paper guide bar which is movable, a fixed top bar and an auto Compressor bar. All of these are designed for accuracy and aids in more precise positioning and cutting.  The cutting length is from B7 size up to A3 size (97mm to 420mm). The cutting blade can be locked away when not in use for safety purpose. Also, all 3 sides of the metal base have chamfered edge to prevent any accidental cut from the metal. Metal base is spray-painted and coated with a thick coat of paint. Quality, precision and ease of use is the key to cut precisely what you want to cut.

This is one of the office equipments that is very commonly use in many offices and even schools.

Technical Data:

• Material: Mostly metal
• Overall Size: W:395mm  x D:660mm  x H:50mm
• Metal Top Surface Size: W:383mm  x L:465mm
• Clearly printed paper size indicator on top surface
• Calibrated 1cm-apart scale on both horizontal & vertical sides
• Paper Cutting: B7(128mm x 91mm) to A3(297mm x 420mm) sizes
• Cutting: Up to 5-8 sheets of 80g wood-free paper
• Magnetic movable paper guide & auto-compressor bar
• Non-slip rubber stoppers attached to base-metal structure
• Blade can be locked to safety position when not in use
• Chamfered edge on all 3 other sides
• Packing: 5pcs/ctn

#8274  A4 Metal-Base Guillotine Paper Cutter

The Guillotine paper cutter or guillotine cutter in short uses a shearing action between 2 metal edges to cut through a stack of paper. Normally a sharp lever arm (cutting blade) with a proper holder, pivoting on the base, where one can lift up and then push down with ease to slice through the stack of paper. Paper is place on top of the flat surface of the sturdy metal base, aligned and then cut. Just below the cutting blade, attached to the metal base, is the other piece of metal that provide the shearing action of cutting the paper. There are no sharp edges.

On the metal base itself, usually rectangular, are alignment grid for precision positioning, commonly using a dual scale system of metric and imperial measurements, to assist with measuring and accurate cuts. In some cases, the stack of paper is held down by a so called Compressor bar before the actual cutting action. There is also a paper guide bar, usually magnetic, for use with more accurate placement of the paper. The heavy metal base is usually attached with rubber studs to provide non-slip operation.

Our 8274 A4 Guillotine Paper Cutter come with a metal base, attached with non-slip rubber stoppers, with clearly printed metric measurement 5-mm apart on both horizontal and vertical sides. This sturdy guillotine cutter is equipped with a magnetic paper guide bar which is movable and a fixed top bar. Both of these are designed for accuracy and aids in more precise positioning and cutting.  The cutting length is from B7 size up to A4 size (97mm to 297mm). The cutting blade can be locked away when not in use for safety purpose. Also, all 3 sides of the metal base have chamfered edge to prevent any accidental cut from the metal. Metal base is spray-painted and coated with a thick coat of paint. Quality, precision and ease of use is the key to cut precisely what you want to cut.

This is one of the office equipments that is very commonly use in many offices and even schools.

Technical Data:

• Overall Size: W:280mm  x D:480mm  x H:50mm
• Metal Top Surface Size: W:254mm  x L:300mm
• Clearly printed paper size indicator on top surface
• Calibrated 5mm-apart scale on both horizontal & vertical sides
• Paper Cutting: B7(91mm x 128mm) to A4(210mm x 297mm) sizes
• Cutting: Up to 6 sheets of 80g wood-free paper
• Magnetic movable paper guide; non-slip rubber stoppers at base-metal structure
• Blade can be locked to safety position when not in use
• Beveled edges on all 3 other sides
• Packing: 6pcs/ctn